One of the most frequently asked questions that one receives from Antique Golf Club Collectors is on the care and repair of hickory golf clubs. Here we're going to discuss 2 forms of hickory golf restoration; the correct methods for both straightening and for increasing a Hickory shaft.
Many collectors have evaded a Vintage golf club if the hickory shaft has been warped more than an in. or so along its length. Even though the remainder of the club might be in good or perhaps wonderful condition, many die-hard collectors cannot overcome the results of that imperfect shaft
If the club is in otherwise good shape, don't instantly throw in the towel on it; Here's what you need to do:
First, obtain a section of hollow metal tubes about 45 inches long which has an inner diameter just larger than the shaft you wish to straighten.
Next, remove the grip from the club.
Employing a hand-held gas blowtorch heat the hickory shaft. If the shaft has a local kink in it, heat it around that area. If the shaft is bowed over a longer section heat all of that section appropriately.
You'll need to pass the flame over the shaft at a decent pace- too slow and you melt the varnish and burn the wood. To fast and you may not get sufficient heat into the wood- this is where practice on a less valued club is endorsed You want to get the wood hot enough for it to bend easily. You should, naturally, be wearing some safety glasses and some (leather not rubber) safety gloves. Once the shaft feels hot through the gloves apply some light pressure to it to straighten out the worst sections - bending it over another separate block of wood works very well. With the wood still hot (warm up it if necessary) place the shaft into the metal tube and leave it to cool naturally for no less than 20 minutes.
When you remove the shaft, it will be straightened! Simply repeat the method as needed. This is relatively simple and can truly be done by anybody.
The other common repair which is frequently viewed as maybe too pointless or too hard is the extending of a Hickory shaft. The truth is this may also be accomplished very simply if you follow our simple system. You may visit our site right now ang get all the details which you need to finish your Hickory Golf restoration
The most significant thing, as with any dreary task involving fragile materials is practicing patience, and in this project, it will serve you well.
Many collectors have evaded a Vintage golf club if the hickory shaft has been warped more than an in. or so along its length. Even though the remainder of the club might be in good or perhaps wonderful condition, many die-hard collectors cannot overcome the results of that imperfect shaft
If the club is in otherwise good shape, don't instantly throw in the towel on it; Here's what you need to do:
First, obtain a section of hollow metal tubes about 45 inches long which has an inner diameter just larger than the shaft you wish to straighten.
Next, remove the grip from the club.
Employing a hand-held gas blowtorch heat the hickory shaft. If the shaft has a local kink in it, heat it around that area. If the shaft is bowed over a longer section heat all of that section appropriately.
You'll need to pass the flame over the shaft at a decent pace- too slow and you melt the varnish and burn the wood. To fast and you may not get sufficient heat into the wood- this is where practice on a less valued club is endorsed You want to get the wood hot enough for it to bend easily. You should, naturally, be wearing some safety glasses and some (leather not rubber) safety gloves. Once the shaft feels hot through the gloves apply some light pressure to it to straighten out the worst sections - bending it over another separate block of wood works very well. With the wood still hot (warm up it if necessary) place the shaft into the metal tube and leave it to cool naturally for no less than 20 minutes.
When you remove the shaft, it will be straightened! Simply repeat the method as needed. This is relatively simple and can truly be done by anybody.
The other common repair which is frequently viewed as maybe too pointless or too hard is the extending of a Hickory shaft. The truth is this may also be accomplished very simply if you follow our simple system. You may visit our site right now ang get all the details which you need to finish your Hickory Golf restoration
The most significant thing, as with any dreary task involving fragile materials is practicing patience, and in this project, it will serve you well.
About the Author:
Andrew Shea has been concerned in Antique Golf, both on a private level, and in a pro capacity for many years. If you have got a question or are interested in vintage golf clubs often, you're often welcome at his site.
No comments:
Post a Comment