Getting a good supply of reloading brass is something that can challenge reloaders. Buying complete loaded rounds and discharging them to get the cases can be very costly. If you want to use the cases to make rare cartridges, and do not have a firearm which takes the original caliber, then it is senseless.
The majority of calibers, especially if in common use, have sources of new cases available at affordable prices. For rarer calibers there are sometimes turned cases available which are expensive. They can also have problems with splitting, and generally have a shorter life than ordinary drawn cases.
Used cases may be unreliable, although reloaders are mostly dealing with cases that have been fired several times. Careful reloaders inspect the cases and quickly reject those that show any dangerous signs of pressure or splitting. It is also important to keep track of the number of uses and discard brass when a practical limit is reached.
Purchasing cases which have been previously fired can present problems, and you would also need to inspect them carefully. You might end up discarding a lot of them, , which would push up the price per reload. Another factor is that you would not know how many times they have been fired, and would need to set a lower limit on uses in consequence.
Guaranteed once-fired cases are a real find, and are just perfect. You would still need to inspect them, but the number of discards should be low. This sort of supply is usually only for military or the most common calibers, but any you can use would be most welcome.
When looking for reloading brass, once-fired would be your first choice on the basis of price, followed by new drawn cases. Depending on your requirements, this might be enough. Aficionados of rare calibers might need to resort to a turned case, but it will cost!
The majority of calibers, especially if in common use, have sources of new cases available at affordable prices. For rarer calibers there are sometimes turned cases available which are expensive. They can also have problems with splitting, and generally have a shorter life than ordinary drawn cases.
Used cases may be unreliable, although reloaders are mostly dealing with cases that have been fired several times. Careful reloaders inspect the cases and quickly reject those that show any dangerous signs of pressure or splitting. It is also important to keep track of the number of uses and discard brass when a practical limit is reached.
Purchasing cases which have been previously fired can present problems, and you would also need to inspect them carefully. You might end up discarding a lot of them, , which would push up the price per reload. Another factor is that you would not know how many times they have been fired, and would need to set a lower limit on uses in consequence.
Guaranteed once-fired cases are a real find, and are just perfect. You would still need to inspect them, but the number of discards should be low. This sort of supply is usually only for military or the most common calibers, but any you can use would be most welcome.
When looking for reloading brass, once-fired would be your first choice on the basis of price, followed by new drawn cases. Depending on your requirements, this might be enough. Aficionados of rare calibers might need to resort to a turned case, but it will cost!
About the Author:
Looking to find the best Reloading Brass, then find out more about Realoading Supplies from Top Brass Reloading.
No comments:
Post a Comment