TaylorMade R9 Irons are some of the most effective game improvement irons on the market. If you are still having trouble with your game you may be tempted to think that the clubs just aren't helping. Before you put those clubs up on eBay you may want to consider that it might not be the club's fault.
Don't get down on yourself for having a sub par golf game. Just because the clubs aren't at fault doesn't mean things are hopeless. In fact, if you follow these tips and log a little practice time at the driving range you will be amazed at the difference. It won't be long before you see just why the TaylorMade R9 Irons are so highly regarded. These tips will work for every golfer, even those who haven't seen the light and purchased the R9's yet.
These first few tips will get you started to correcting your swing so you can get the most out of your clubs. If you still have trouble with your swing even after implementing these strategies be sure to continue your research and find an online community where you can get feedback and advice from other golfers.
Problem 1: Hitting ground balls or the proverbial "worm burner".
Do you have trouble getting your ball more than a couple of feet off the ground? Do you swing hard and find that you hit the top of the ball and drive it into the ground or pop it up just a couple of feet and watch it settle disappointingly close to where it was?
Possible Cause 1: You are trying to hit up on the ball with your irons to get it into the air.
If we want something to go up we should hit it up, right? It seems logical enough. This is the case with our driver off the tee. You want to hit the ball just as your driver starts on it's way back up. When you are swinging your driver the ball is on a tee though. It's a very different scenario with our irons. If you try to swing your irons the same way you swing your driver you will spend the day moving 10 yards at a time because you are topping the ball.
The Fix: Make sure you are connecting with the ball on your down swing. Watch a few clips of some pro's hitting their irons. Notice how the ball gets up in the air and they always seem to take a divot? This is a proper swing. Irons are designed to hit the ball on the down swing and pop the ball up with back spin. If you do it properly you will take a small divot AFTER you connect with the ball. The "after" part is important. If you are bulldozing the ground before you get to the ball you are swinging down too much on the ball. Don't forget to follow through too. And no, this is not permission to tear up the golf course. The key is small divots.
Second Cause: Swinging with your arms, no weight transfer, and lifting your head.
The fix: This is a tough one. If you over analyze your swing and try to remember everything you were told you are going to make far too many adjustments to your swing and you'll be all over the place. I recommend taking the scientific approach. Take one thing at a time and adjust it to see if that is where your problem lies.
Many beginning golfers try to focus on correct weight transfer. Weight transfer is important but when you are starting out I think you should stick to the fundamentals such as where your weight should be at impact. I recommend trying a few swings maintaining your weight on your left foot. This is where it should be when you make contact. You may have heard of the stack and tilt method? Some people scoff at it but if you are having trouble making solid contact, slow down your swing and take a few where you are in the correct position when you strike the ball. It will help you identify what you were doing wrong and you can move on from there.
In closing I want to remind you not to try to change too much at once. I had a friend who couldn't stop slicing the ball. He tried everything to fix it, even buying TaylorMade R9 irons. He had a checklist he would try to read off in his mind during each swing. This only made the problem worse. One day I said try this, throw out your check list and just repeat "slow and steady". You'd be surprised by the results. He slowed down his backswing and focused on a smooth delivery and all of those little things he was trying to remember just sort of happened.
Don't get down on yourself for having a sub par golf game. Just because the clubs aren't at fault doesn't mean things are hopeless. In fact, if you follow these tips and log a little practice time at the driving range you will be amazed at the difference. It won't be long before you see just why the TaylorMade R9 Irons are so highly regarded. These tips will work for every golfer, even those who haven't seen the light and purchased the R9's yet.
These first few tips will get you started to correcting your swing so you can get the most out of your clubs. If you still have trouble with your swing even after implementing these strategies be sure to continue your research and find an online community where you can get feedback and advice from other golfers.
Problem 1: Hitting ground balls or the proverbial "worm burner".
Do you have trouble getting your ball more than a couple of feet off the ground? Do you swing hard and find that you hit the top of the ball and drive it into the ground or pop it up just a couple of feet and watch it settle disappointingly close to where it was?
Possible Cause 1: You are trying to hit up on the ball with your irons to get it into the air.
If we want something to go up we should hit it up, right? It seems logical enough. This is the case with our driver off the tee. You want to hit the ball just as your driver starts on it's way back up. When you are swinging your driver the ball is on a tee though. It's a very different scenario with our irons. If you try to swing your irons the same way you swing your driver you will spend the day moving 10 yards at a time because you are topping the ball.
The Fix: Make sure you are connecting with the ball on your down swing. Watch a few clips of some pro's hitting their irons. Notice how the ball gets up in the air and they always seem to take a divot? This is a proper swing. Irons are designed to hit the ball on the down swing and pop the ball up with back spin. If you do it properly you will take a small divot AFTER you connect with the ball. The "after" part is important. If you are bulldozing the ground before you get to the ball you are swinging down too much on the ball. Don't forget to follow through too. And no, this is not permission to tear up the golf course. The key is small divots.
Second Cause: Swinging with your arms, no weight transfer, and lifting your head.
The fix: This is a tough one. If you over analyze your swing and try to remember everything you were told you are going to make far too many adjustments to your swing and you'll be all over the place. I recommend taking the scientific approach. Take one thing at a time and adjust it to see if that is where your problem lies.
Many beginning golfers try to focus on correct weight transfer. Weight transfer is important but when you are starting out I think you should stick to the fundamentals such as where your weight should be at impact. I recommend trying a few swings maintaining your weight on your left foot. This is where it should be when you make contact. You may have heard of the stack and tilt method? Some people scoff at it but if you are having trouble making solid contact, slow down your swing and take a few where you are in the correct position when you strike the ball. It will help you identify what you were doing wrong and you can move on from there.
In closing I want to remind you not to try to change too much at once. I had a friend who couldn't stop slicing the ball. He tried everything to fix it, even buying TaylorMade R9 irons. He had a checklist he would try to read off in his mind during each swing. This only made the problem worse. One day I said try this, throw out your check list and just repeat "slow and steady". You'd be surprised by the results. He slowed down his backswing and focused on a smooth delivery and all of those little things he was trying to remember just sort of happened.
About the Author:
Looking to find the best deal on TaylorMade R9 irons, then visit TaylorMadeR9irons.com to find the best advice on R9 irons for you.
No comments:
Post a Comment